Tech

iFixit drilled a key ring hole into one of Apple’s AirTags in its latest teardown

iFixit drilled a key ring hole into one of Apple’s AirTags in its latest teardown
Written by admin
iFixit drilled a key ring hole into one of Apple’s AirTags in its latest teardown

iFixit drilled a key ring hole into one of Apple’s AirTags in its latest teardown

The group over at iFixit has executed its teardown factor once more, this time analyzing Apple’s AirTag trackers. Half one of its two-part evaluate digs into the center of the little trackers, and for these lamenting the shortage of a key ring loop on the AirTag, iFixit (rigorously) drilled a hole into one with out damaging any of its components.

After some reconnaissance inside our first AirTag, we grabbed a 1/16” drill bit and thoroughly punched a hole by means of the second tracker in our four-pack—after eradicating the battery, of course. We miraculously managed to keep away from all chips, boards, and antennas, solely drilling by means of plastic and glue. The most effective half? The AirTag survived the operation like a champ and works as if nothing occurred.

The group cautioned that it’s a must to take away the battery earlier than drilling, and warned that drilling in the flawed place could cause severe injury. So do that at house solely you probably have talent with a drill.

AirTags 61 drill

iFixit drilled a hole into an AirTag for a keyring, and it survived
iFixit

iFixit in contrast ‌its AirTags‌ to the Tile Mate and the Samsung Galaxy SmartTag. AirTags are the smallest of the bunch, with its 3-volt coin cell detachable battery— sort CR2032, similar because the one SmartTags use—taking on most of the interior house. “All three trackers open up with finger energy—no different instruments required,” in keeping with iFixit, however they discovered the AirTag’s was probably the most troublesome to take away.

AirTags 58

From left: Tile Mate, Galaxy SmartTag, and Apple AirTag
iFixit

An X-ray of the three tags exhibits Apple made environment friendly use of its inner house, nothing that “the relative darkness of the AirTag [in the X-ray image] is because of a hefty central speaker magnet and its metal battery cowl. iFixit tweeted a 360-video of the X-ray picture:

Try the complete iFixit tear down of Apple’s AirTags right here. And coming quickly, they’ll have detailed board photographs and a take a look at the onboard silicon, presumably in half two.

#iFixit #drilled #key #ring #hole #Apples #AirTags #latest #teardown

About the author

admin